Daikin 3.5 kW Air Conditioner Installation and Switchboard Replacement in Parkdale

We supplied and installed a 3.5 kW Daikin air conditioner and replaced the existing switchboard at a property in Parkdale. The job was completed on 16 November 2026.
The work covered both the air conditioning installation and the board replacement. The photographs below show the outdoor unit on site and the switchboard before and after replacement.
Project at a glance
| Detail | Project information |
|---|---|
| Location | Parkdale, VIC 3195 |
| Air conditioning | 3.5 kW Daikin split-system supply and installation |
| Electrical work | Existing switchboard replaced |
| Completed | 16 November 2026 |
The air conditioning installation
The air conditioning part of the job was the supply and installation of a 3.5 kW Daikin system. The site photograph shows the outdoor unit mounted beside the brick wall, with its external pipework running above it.
For help planning your own installation, see our air conditioner installation service. Tell us about the space you want to condition and the setup you have now, so the proposed work can be discussed for your property.
Replacing the existing switchboard
The existing board shown in the job photos used ceramic fuses. We replaced the switchboard as part of the agreed work. The replacement board is shown below with its circuit labels in place.
Board replacement and air conditioning installation are separate parts of a quote. This Parkdale project included both. A new air conditioner does not automatically mean the whole switchboard needs replacing; the recommended scope depends on the installation being assessed.
Our switchboard upgrade and replacement service explains the service. If you are unsure how board work differs from replacing house wiring, read our switchboard upgrade vs house rewiring guide.
The completed scope
This project combined a new 3.5 kW Daikin installation with replacement of the existing switchboard. The photographs keep the two parts of the work visible: the outdoor air conditioning equipment and the change at the board.
Planning similar work?
Tell LDS Air & Electrical what you want installed, your suburb and whether you also have concerns about the existing switchboard. We can discuss the work you need and explain the proposed scope before you decide how to proceed.
Contact LDS Air & Electrical or call 0411 232 330.
