November 15, 20268 min readBy David, LDS Air & Electrical (REC 36349)

Replacing Halogen Downlights With LEDs: What to Check Before Booking

Installed recessed ceiling downlights in Melbourne home

Before you buy LED replacements for your halogen downlights, have the existing setup checked. Some lights can take a suitable replacement globe. Others need a new fitting, and the old dimmer may need changing too.

You don't need to know the technical details before calling an electrician. Start with what you want to change. Perhaps the lounge feels too bright at night, or you'd like to replace the old lights without repairing the ceiling afterwards. Those details help the electrician work out what will suit your home.

A new globe or a new fitting?

When you ask for an LED upgrade, check what the electrician is quoting for.

A replacement globe fits into the light you already have. Its shape and base need to match, but it also has to work with any existing transformer and dimmer. Looking the same doesn't mean two globes will work in the same setup.

A complete LED downlight replaces the fitting itself. It may come with a separate driver, which supplies power to the LED. The electrician needs to check the wiring and ceiling space, then explain which old parts can stay and which need removing.

If you aren't sure what you have, a photo from floor level can help. Leave the fitting in place. Don't pull it out to find a label or look at the wiring.

Will it fit the hole that's already there?

The trim you see from the room is wider than the hole behind it. Two fittings can look about the same size but need different openings.

Have the electrician check the hole size, the space above it and how the new fitting will be held in place before ordering lights. Ask whether the existing holes can be reused and have that included in the quote.

If a hole needs changing, check who will handle the plastering and painting. You don't want to find out after the lights are installed that finishing the ceiling is a separate job.

Check the dimmer before choosing the lights

You may be able to keep your dimmer, but don't assume it will work with the new LEDs. Even a globe marked "dimmable" can be unsuitable for an older halogen dimmer.

The light, driver and dimmer need to work together. If they don't, the lights may flicker or only dim through a small part of the range. Ask the electrician to check the combination before you buy a full set.

Think about which rooms actually need dimming. You might want softer light in the lounge while being happy with a normal switch elsewhere. That choice affects what needs supplying and installing.

Mention any flickering or buzzing you already have. It needs checking; changing the globe alone may not fix it.

How do you want the room to feel?

A light can fit perfectly and still be wrong for the room. Before choosing, think about how bright you want it and whether you like warm or whiter light.

Brightness and where the light falls

Compare lumens when you're choosing brightness. Watts tell you how much electricity a light uses; lumens tell you how much light it produces. An LED can provide similar light output to a halogen while using fewer watts.

The beam angle matters too. A narrow beam lights a smaller area, while a wide one spreads the light further. Two fittings with the same lumen rating may light the room quite differently.

Tell the electrician if there's glare where you sit or a kitchen bench that stays dark. Putting new fittings in the old positions won't necessarily fix that. The layout, beam angles or controls may need changing.

Warm white or cool white?

If you like the warm look of your halogens, ask about warm white LEDs around 2700K to 3000K. Whiter light around 4000K may suit a kitchen or study where you want to see detail.

Ask to see the colour before choosing lights for a whole room. If you're only replacing a few, check how they will look beside the ones you're keeping.

You can discuss the layout and fittings through LDS's lighting installation service before deciding what to order.

The electrician also needs to check above the ceiling

Older halogen downlights can produce a lot of heat. Insulation or other material around a light or transformer can create a fire risk if the installation is unsuitable.

The electrician needs to check the ceiling conditions and follow the new product's installation instructions. Every LED downlight and driver has its own requirements, so don't assume insulation can cover it.

Leave those checks to the professional. Don't enter the roof space to move insulation or inspect electrical equipment yourself.

Compare the quotes by what's included

If one quote is cheaper, check whether it covers the same work. A price for changing globes won't cover everything involved in replacing complete fittings.

Check this What the quote should make clear
Lights and rooms How many lights are included, and where will they go?
Products Which fittings and drivers are supplied, with what brightness and light colour?
Dimmers Will the existing controls be checked, kept or replaced?
Old equipment What happens to the old lights and transformers?
Ceiling finish Can the holes be reused, and who handles plastering or painting?
Wiring and access Is extra wiring or difficult ceiling access included or charged separately?
Finishing the job Are testing, the required certificate and removal of old equipment included?
Warranty What product and workmanship cover applies, and who handles a failed light?

Ask what happens if the electrician finds damaged wiring or another problem once work starts. Any extra work and its price should be explained and approved before it goes ahead.

What difference will LEDs make to the power bill?

LEDs generally use less electricity than halogens for similar light output. Your saving will depend on the lights you replace, the new fittings, how long you use them and your electricity rate.

Ask for a comparison using the products in your quote. Remember that a percentage saving on lighting use applies to the lighting, not the whole electricity bill.

Consider the installed price and warranty as well. The right choice needs to suit the room and work with the controls you want.

A few other things worth asking

Can you use LED globes in halogen downlights?

Some fittings can take a suitable LED replacement globe, but the base and size are only part of the check. The globe also needs to work with the existing transformer and any dimmer. Have the setup checked before buying a full set. If the equipment isn't compatible, ask whether changing the complete fitting would be more suitable.

How much does replacing halogen downlights with LEDs cost?

The quote depends on how many lights you're changing, whether the old holes can be reused and what needs doing to the wiring and controls. A new position or a ceiling that's difficult to access involves different work from a straightforward replacement.

Ask for a written quote that identifies the fittings, drivers and any dimmer changes. Check whether ceiling repairs, old equipment removal, testing and the required certificate are included. That gives you a useful comparison without assuming every per-light price covers the same job.

Can I change the lights myself?

Changing a user-replaceable globe is different from changing a hardwired fitting, transformer, driver or dimmer. Work on the fixed electrical installation needs a licensed electrician. If you don't know which job is involved, have it checked before buying or removing anything.

Can I do one room at a time?

Ask the electrician whether that suits your setup. They need to consider the controls and the equipment sharing them. Also check how the new light colour will look beside the old lights. Agreeing on the final result makes it easier to plan the work in stages.

What if the new LEDs flicker?

Tell the installer when it happens and whether adjusting the dimmer changes it. The fitting, driver or dimmer may not be compatible, or there may be a fault that needs testing. Have the cause checked before spending money on more globes.

What if the lighting circuit keeps tripping?

Leave the affected circuit off and arrange fault finding. The cause needs checking before treating it as a lighting upgrade. Our guide to a safety switch that keeps tripping explains the warning signs and what to tell the electrician.

Will I get a safety certificate?

For electrical installation work in Victoria, the electrician must provide a Certificate of Electrical Safety. Ask what work it covers and keep your copy with the quote and product details.

Talk to LDS about your downlights

LDS Air & Electrical is based in Glen Huntly and provides electrical services across Melbourne's south eastern suburbs.

Tell us which rooms you'd like to update, about how many lights you have and whether you use dimmers. Photos taken safely from below can help explain the setup. If anything is flickering, buzzing or tripping, mention that too so it can be checked separately from the planned upgrade.

Call 0411 232 330 or contact LDS about your lighting upgrade.